The magnificence of 3, 6 and 9

If you only knew the magnificence of the 3, 6 and 9, then you would have a key to the universe.
readers of MERLib - verify whence this quote originates from, please?

The most remarkable and inexplicable aberration of scientific mind ever in history.

"The hertz wave theory of wireless transmission may be kept up for a while, but i do not hesitate to say that in a short time it will be recognized as one of the most remarkable and inexplicable aberrations of the scientific mind which has ever been recorded in history."

Turning nature's design into scientific breakthrough



When Jay Harman was a skinny 10-year-old swimming off the coral reefs of Australia's western coast, he had an insight that 37 years later would lead him to invent an industrial design that could change personal computing, aeronautics and how drinking water is purified.

As a nature-loving boy, the young Australian just wanted to swim faster, so he watched how fish moved through water and how seaweed undulated against the reef when a wave crashed.

The shape he noticed that day was a simple curve that fluidly formed into a spiral. From then on, Harman would see spirals as a common design in nature--in pinecones, whirlpools, a puff of smoke.

Jay Harman

Now he believes spirals are a key to making a wide array of machines more energy-efficient. Through his 9-year-old company, Pax Scientific, he's trying to bring that natural form into the technological world. So far, he's invented industrial designs for fans, pumps and propellors that mimic the geometries of spiraling whirlpools. Experts believe these designs can reduce friction, wasted energy, noise and unwanted heat.

Moray Valve Manuscript

  Moray Valve Manuscript Part I, Radiant Energy Device

This account will endeavor to give a brief explanation of the Moray Radiant Energy device whereby it is possible to utilize the vast stores of energy of the universe without a prime mover, but through ionic oscillations.

A brief description of the device.

Experimental Research of the Magnetic-Gravity Effects. Full Size SEG tests.


V. V. Roschin, E-mail: [email protected]u

S. M. Godin, E-mail: [email protected]

Institute for High Temperatures, Russian Academy of Science, Izhorskaya 13/19, Moscow 127412, Russia



Thomas Henry Moray: The Sea of Energy ~ Excerpts of technical factoids & illustrations of the Moray Radiant Energy Receiver


Excerpts of technical factoids from:

The Sea of Energy

[ From the original The Sea of Energy in Which the Earth Floats ]


Thomas Henry Moray

1978 Edition: Cosray Research Institute, Salt Lake City, UT

Table of Contents

Chapter 1 ~ Early years
Chapter 2 ~ Radiant Energy in Earnest
Chapter 3 ~ Frienemies
Chapter 4 ~ Moray Products Company
Chapter 5 ~ Patents
Chapter 6 ~ Government Support
Chapter 7 ~ A New Era of Energy
Chapter 8 ~ Reactions by Means of Electron Excitation
Chapter 9 ~ Dissociation of Matter
Chapter 10 ~ Energy by Resonance
Chapter 11 ~ Conclusion
Appendix I
Appendix II
Appendix III
Appendix IV
Appendix V
Appendix VI

[ 4th Edition ]

RADIANT ENERGY --- The term Moray has used to describe that source of energy coming from the cosmos to earth and radiating from the earth back from whence it came. This is the energy the Moray device captures and could be described as those particles of energy pervading all space. In the evolution of energy and the evolution of matter these particles of matter and energy (one and the same) manifest under certain conditions as pure energy and under others as pure matter. Radiant Energy from the cosmos, like radiant particles of matter, being composed of an infinitesimal quantity whose behaviors are described by mathematical equations similar to those used for describing electrical waves, keeping in mind to differentiate between wavelength and frequency. Radiant Energy is particles of energy, just as light is wavelengths and particles are comparable to the electron and magneton: a ring of negative electricity traveling in a vortex with the speed of light, streams of energy quanta, each quantum having energy and momentum where the electron revolves around the proton at a distance equal to the electron radius.

To summarize: Radiant Energy as herein used is that energy existing in the luminiferous medium of the universe, kinetic and exercised in wave transmission and rendered sensible by conversion of its energy into a detectable frequency. In the final analysis, Radiant Energy is a means of using the energy released by the fissionable reactions taking place in the stellar crucibles of the universe.




FEBRUARY 3, 2004

click here for EDAV Project Part l

click here for EDAV Project Part ll

click here for EDAV Project Part lll

>>  click here for Waveplate Mechanics  <<

The continued research into the action of the waveplates brings forth many known scientific rules which I will begin to address in these writings.

Also, Victor S. especially noted that the waveplates be fabricated out of copper alloy material, with a silver coated anodizing. The egg shaped housing is also fabricated out of copper. So, of course the logical question is why. This will also be addressed in these writings.

To begin with, as you start the spin of the waveplates, you will create a vacuum of air to be sucked across the plates toward the outside diameter. This will now start a rotation of normal air molecules circulating counterclockwise around the inside of the enclosed housing. Now anytime you enclose circulating air mass in an enclosed chamber, the normal air friction between the air molecules and the housing will create heat. The recirculating air, spinning into itself creates no friction, so it is the subsequent impact that creates this heat. Heat always creates pressure. So now we have a building of pressure also inside the egg housing. The normal resistant air has to come from somewhere so a velocity cone is assembled into the center of the housing to direct incoming cool air into the spinning plates. See DIAGRAM 1. Now the air has to have an escape method so at the top of the egg housing and attached to the center mounted velocity cone is an exhaust turbine that is connected via the velocity cone back to the waveplates. As the heated air begins to build pressure, this pressure is naturally funneled into the exhaust turbine. The resulting pressure is now used to add velocity back down the cone into the waveplates. Now, the resulting airflow inside begins to increase in temperature to about 300-500 degrees F. within a few minutes.

This is where things begin to get interesting. The press formed plates after assembly create a waveform intersticial space. Both plates are maintained at a distance at the inside diameter and decrease in a uniformed distance all the way to the outside diameter. Now the exact spacing is unknown at this time. The slits cut into the upper plates let the outside circulating air get sucked into the area between the waveplates. Rotational velocity creates the suction or vacuum. So after a period of time we now have normal resistant air in the chamber getting very hot, and this air is being sucked right back into the waveplates. Lets take normal water and cool it to a crisp 42 degrees and now inject this cooled water into the center of the intersticial area. We will now create a normal thunderstorm to happen which I will denote as a natural endothermic reaction. Science describes an Endothermic Reaction to be: “Cold tries to take energy away from hot and creates an expansion of pressure”. Victor talks about this same thing on page 87-88, “Heat is first generated thru friction. The heat is immediately absorbed by the water and in the process a physical vacuum is created. Which then gives rise to the emergence of inner atomic rays. Due to the absorbed heat, the free dissolved oxygen still present in the water becomes aggressive owing to the present of the vacuum. Through the encounter of the mutually opposed, contra-directionally propagated, excited rays, the precondition for the marriage is created, the child of this union is organic, or cold light.

Now, not a lot of water need be injected to cause this to happen and if this water is atomized at the injection point, a better reaction is created. In between the waveplates we now have created a pressurized state to develop on top of the rotational vacuum. Whereby creating the repulsion state to come about.

Lets look at a normal garden hose. Usually a garden hose has about 40 lbs of pressure behind it to flow the water. By installing a squeeze nozzle at the end, the pressure in the hose builds, and when you squeeze the nozzle and inject all that pressure thru a very small orifice, a stream of water up to 20 feet is ejected. Now lets put this same analogy into the waveplates. We have produced now a pressure inside the waveplates that is vacuumed to the outside diameter by rotational velocity and now all is required is a small orifice around the outside diameter to create the repulsion energy. As the rotation increases, pressure increases, and when the repulsion effect happens the air molecules create their expansion on exiting the orifice at the outside diameter subsequently ejecting against the turbine blades which are cocked at a 30 degree angle. This results in a increase of rotation of the waveplates along with the expansion of air pressure up to 115 times. The ejection of the repulsed air will now also increase the pressure inside the egg housing increasing the pressure against the exhaust blades creating even more spin back into the waveplates. We now have created a living breathing motor, just as V.S. has talked about. By siphoning off the rotation of the center shaft and reducing the rpm thru a reduction drive now creates H.P. Rotational control can also be done by creating a mechanical devise to control the turbine blade angle to increase or decrease spin, Much like an adjustable pitch propeller on an aircraft.

But every engine will produce a by product from a reaction. Combustion engines that burn gasoline and oxygen produce carbon monoxide. The repulsion engine will produce a hydrogen byproduct, after separating the hydrogen molecule from the oxygen. But now this hydrogen molecule is being recirculated back thru the waveplates along with the normal resistant air and we may now create sub-atomic hydrogen. So now our calculations are changed from normal resistant air molecules to heated hydrogen ionized gas circulating around the egg chamber. A completely different set of temp/pressure/ vacuum equations are justified because of the now changing gas product.

Electrical emissions are also a by-product of this wonderful device. Since the waveplates are isolated away from the center shaft, a positive charge of electricity is going to build up on the waveplates. This is also explained by “When the hydrogen atom is caused to impact a copper atom at a high rate of acceleration, then the copper atom will capture the last remaining electron of the hydrogen atom”. This now creates the basis for ionized hydrogen or sub-atomic hydrogen.

A Hydrogen Ion: Having a kinetic energy of 1 electron volt, would have a velocity of 10.85 x 10(3) m/sec or nearly 6.1 miles per second (32,208 ft/sec. or 21,954 mph.). As long as ionized hydrogen does not combine with other gases like 02 it will be H or monatomic hydrogen. It will occupy twice the space of H2 and have twice the lifting power. (.014) Hydrogen gas on the other hand has a average molecular speed of 1693 m/sec or 5554.73 ft/sec @32 degrees F. or 0 degrees Centigrade. That is .07 lbs lift per cubic foot of gas.

The blue hue effect seen outside the egg housing is the formation of monatomic hydrogen which has lost its last remaining electron to the copper waveplates. This again is known well in the circle of science. Most cases of UFO sightings will talk about a humming noise or the blue hue noticed around the top of the circular vehicles.

The waveplates have to be isolated away from the center shaft, because this charge is not allowed to be grounded. Noticed, by more than one observer who has been able to create this effect is the strong static lightning bolts seen shooting out of the repulsion housing. These build up of charges can be captured and manipulated to capacitors and Static/AC/DC transformers for production into usable electrical current. This current can be used in operation of the vehicle or used to process electrical energy for residential use. Imagine running your repulsion system on the water supplied to your house. Static electricity is also the basis for electronic force fields.

V.S. wrote that on average, implosive forces are 127 times more powerful than explosive forces. Tesla’s 12” multi bladed turbine produced a possible 125 hp while Schaubergers 12” waveplates produced 1250 hp. (10 times more) Small implosion machines of 8” diameter rotating at 10,000 rpm. Can lift 57 tons and at 20,000 rpm. 228 tons.

So a 18” diameter should connect with repulsion energy at about 1500 rpm with an outside diameter velocity of 14,130 ft/min. or a speed of 282.6 mph. A total rpm range can easily exceed 10,000 rpm. So this could generate an enormous lift range totally incomparable to anything in existence even today. Air driven implosion machines specify air speeds of 124 mph. (124mph x 5280ft = 654720/60 min. = 10912/60 sec = 181.86 fps.

Wind velocity, must exceed this amount before repulsion happens. (pg. 134 fig.21) The greater the rpm, the more lift capability. So the 18” waveplate rotating at 10,000 rpm has an outside velocity of 1570 fps. Exactly how much lift capacity (suction), unknown. The actual volume of cubic feet of air moving thru the repulsion unit is staggering.

Hydrogen, being a by-product of the repulsion unit does not destroy the atmosphere like carbon monoxide. It actually enhances the environment.” The aeriform substances transformed in the machine create very high grade nitrogenous material which increases the vitality and germinating capacity of the vegetation”. V.S. PG. 116 Energy Evolution

Wave Frequency’s

Wave frequencies are also emitted from the repulsion unit upon entering the repulsion state. These frequencies are denoted to be in the 8 megahertz range. Much has been found regarding this information and will write more on this at a latter time.

Waveplate Technology

There are numerous ways of restructuring the waveplate system to cause many forms of energy to come about. I will explain several of these that were written in “The Energy Evolution” book.

Sound Wave Energy - Research - Groups of People


On this page you will find exciting discovery by various researchers, in the field of vibrational healing, as well as our own research using the Sound Wave Energy recordings. These findings are intended to assist in a greater understanding of the true make-up of the physical body. By understanding that we are more than what we see, we can address the areas where dis-ease most frequently occurs... in the subtle, or etheric bodies. Science is beginning to prove what many have known intuitively for eons, that we are energetic beings.


from http://www-phys.llnl.gov/N_Div/sonolum/

Sonoluminescence: an Introduction

About the LLNL sonoluminescence experiment

What is sonoluminescence?

Sonoluminescence is the emission of light by bubbles in a liquid excited by sound. It was first discovered by scientists at the University of Cologne in 1934, but was not considered very interesting at the time.[1]

In recent years, a number of researchers have sought to understand this phenomenon in more detail. A major breakthrough occurred when Gaitan et al. were able to produce single-bubble sonoluminescence, in which a single bubble, trapped in a standing acoustic wave, emits light with each pulsation.[2] Before this development, research was hampered by the instability and short lifetime of the phenomenon.

Klimator - Stewart Mackenzie


From: "Curt Hallberg" <[email protected]>
Date: Tue Aug 23, 2005  12:35 pm
Subject: SV: [viktorschaubergergroup] Curt -> Klimator

Hi Stewart!

OK, I will TRY to answer your questions below! Now, I some cases we simply do not have the correct information. Then we must use our technical skill and imagination. An other thing we must do is to learn to think how Viktor Schauberger think. First read the litterature, doing this try to remember the most basic things about Implosion. Then maybe the most important: DO SOMETHING PRACTICAL!! Just start to play with water make spirals, or look into the nature in water falls etc. But DO something practical!!!


"You can use rules or set theory to dictate timings and note intervals," expands Sandison about their composition strategies. "For instance, you can imagine your melody to run vertically instead of horizontally, so that you're thinking of it as a vertical spiral, running on the spot. There's a thing you can calculate for plants called divergence, which is a ratio of complete turns of spiral leaf positions relative to the number of leaves in that spiral. In plants, this usually gives a Fibonacci number, which is pretty uncanny, but it's basically a natural law that's trying to create optimum distribution of leaf positions, to stop leaves from obscuring each other in sunlight.

Nikola Tesla's Earthquake Machine

http://www.excludedmiddle.com/earthquake.htm "...He constructed a simple device consisting of a piston suspended in a cylinder, which bypassed the necessity of a camshaft driven by a rotating power source, such as a gasoline or steam engine. In this way, he hoped to overcome loss of power through friction produced by the old system. This small device also enabled Tesla to try out his experiments in resonance. Every substance has a resonant frequency which is demonstrated by the principle of sympathetic vibration&endash;the most obvious example is the wine glass shattered by an opera singer (or a tape recording for you couch potatoes.) If this frequency is matched and amplified, any material may be literally shaken to pieces.

Syndicate content