patent

Tesla-stuff google-group opens.

Google Groups
Subscribe to tesla-stuff
Email:
Visit this group

Alternative Energy Institute: Nikola Tesla (missing page found on web.archive.org)

"Nature and Nature's laws lay hid in night: God said, 'Let Tesla be,' and all was light." These words, spoken by B.A. Behrend in 1917, illuminate the respect society held for Nikola Tesla early in this century. Tesla was a Serbian-American inventor and researcher who discovered the rotating magnetic field, which forms the basis of most alternating-current machinery in use today. Born in Croatia (Austria-Hungary) in 1856, Tesla's father was a Serbian Orthodox priest. His mother was unschooled but highly intelligent. It wasn't long before Tesla's parents realized that their son was gifted with unusual insight. In her book, "Tesla: Man Out of Time, " Margaret Cheney, a California science writer, offers an interesting anecdote from Tesla's childhood. "The child began when only a few years of age to make original inventions. When he was five, he built a small waterwheel quite unlike those he had seen in the countryside. It was smooth, without paddles, yet it spun evenly in the current. Years later he was to recall this fact when designing his unique bladeless turbine."

Alternative Energy Institute: T.T. Brown (missing page found on web.archive.org)

Townsend Brown checking a geophysical sensor strip recorder in Hawaii.
? Optical Multimedia (copyright) http://www.soteria.com/

One of the greatest energies in the universe is the force of gravitation. The power potential of this force exceeds atomic energy and produces no deadly gamma rays in the process. During this century, Thomas Townsend Brown probably came closest to tapping the potential of this free and boundless energy. Brown realized early on that mankind's use of power in jet- and rocket-propelled vehicles is a "sledge and hammer" approach to gaining high-speed, high-altitude flight. Engineers have increased vehicle thrust significantly, but the gain in speed and power is marginal when compared to the energy expended. Is brute rocket force the best way to reach the stars? Brown didn't think so (

Practical Guide to Free-Energy Devices - Patents and Scientific Papers

 This is a mirror of http://www.web-space.tv/free-energy/patents.html

Patents and Scientific Papers (in the form presented here, these documents are very informative and should be considered instructional rather than just patents):

 


Patents Part 1: Re-worded excerpt from Howard Johnson's magnet motor patent 4,151,431. This patent describes a powerful motor which it claims can power an electrical generator.

Turning nature's design into scientific breakthrough

http://news.com.com/Turning+natures+design+into+scientific+breakthrough/2100-1008_3-6044461.html

 

When Jay Harman was a skinny 10-year-old swimming off the coral reefs of Australia's western coast, he had an insight that 37 years later would lead him to invent an industrial design that could change personal computing, aeronautics and how drinking water is purified.

As a nature-loving boy, the young Australian just wanted to swim faster, so he watched how fish moved through water and how seaweed undulated against the reef when a wave crashed.

The shape he noticed that day was a simple curve that fluidly formed into a spiral. From then on, Harman would see spirals as a common design in nature--in pinecones, whirlpools, a puff of smoke.

Harman
Jay Harman

Now he believes spirals are a key to making a wide array of machines more energy-efficient. Through his 9-year-old company, Pax Scientific, he's trying to bring that natural form into the technological world. So far, he's invented industrial designs for fans, pumps and propellors that mimic the geometries of spiraling whirlpools. Experts believe these designs can reduce friction, wasted energy, noise and unwanted heat.

Converting Cosmic Radiant Energy Into Electrical Energy

http://www.nuenergy.org/alt/Proceedings2001.htm

by Bruce A. Perreault
-EXOTIC RESEARCH CONFERENCE 2001 PROCEEDINGS-

Abstract

The Earth is bathed in a sea of cosmic and solar energies. Can a device be built that can transform this high frequency energy into usable power? I believe that T. H. Moray did build such a device. This has inspired me to conduct my research and to build my own prototypes. How the radiant energy device really worked might shock a few people once the facts become known.

Present day alternative energy researchers find hope in that, one day, power will be obtained from the energy that runs the Cosmos. In reality, this dream proves to be a lure to its followers, beyond the limits of credibility. A quagmire of unsubstantiated hypotheses exists, so bottomless and unreal. The facts of many newly conceived energy concepts are wholly inadequate, lacking justification, and incapable of throwing any light on the promise of inexpensive, abundant sources of energy.

KeelyNet: Excerpts from: Electronics World & Wireless World concerning Stanley Meyer

Excerpts from: Electronics World & Wireless World
( January 1991) ~ KeelyNet File MEYER1.ASC

Eye-witness accounts suggest that US inventor Stanley Meyer has developed an electric cell which will split ordinary tap water into hydrogen and oxygen with far less energy than that required by a normal electrolytic cell.

Thomas Henry Moray: The Sea of Energy ~ Excerpts of technical factoids & illustrations of the Moray Radiant Energy Receiver


rexresearch.com
http://www.rexresearch.com/moray2/morayrer.htm

Excerpts of technical factoids from:

The Sea of Energy

[ From the original The Sea of Energy in Which the Earth Floats ]

by

Thomas Henry Moray

1978 Edition: Cosray Research Institute, Salt Lake City, UT

Table of Contents

Introduction
Foreword
Chapter 1 ~ Early years
Chapter 2 ~ Radiant Energy in Earnest
Chapter 3 ~ Frienemies
Chapter 4 ~ Moray Products Company
Chapter 5 ~ Patents
Chapter 6 ~ Government Support
Chapter 7 ~ A New Era of Energy
Chapter 8 ~ Reactions by Means of Electron Excitation
Chapter 9 ~ Dissociation of Matter
Chapter 10 ~ Energy by Resonance
Chapter 11 ~ Conclusion
References
Appendix I
Appendix II
Appendix III
Appendix IV
Appendix V
Appendix VI
Figures


Introduction
[ 4th Edition ]

RADIANT ENERGY --- The term Moray has used to describe that source of energy coming from the cosmos to earth and radiating from the earth back from whence it came. This is the energy the Moray device captures and could be described as those particles of energy pervading all space. In the evolution of energy and the evolution of matter these particles of matter and energy (one and the same) manifest under certain conditions as pure energy and under others as pure matter. Radiant Energy from the cosmos, like radiant particles of matter, being composed of an infinitesimal quantity whose behaviors are described by mathematical equations similar to those used for describing electrical waves, keeping in mind to differentiate between wavelength and frequency. Radiant Energy is particles of energy, just as light is wavelengths and particles are comparable to the electron and magneton: a ring of negative electricity traveling in a vortex with the speed of light, streams of energy quanta, each quantum having energy and momentum where the electron revolves around the proton at a distance equal to the electron radius.

To summarize: Radiant Energy as herein used is that energy existing in the luminiferous medium of the universe, kinetic and exercised in wave transmission and rendered sensible by conversion of its energy into a detectable frequency. In the final analysis, Radiant Energy is a means of using the energy released by the fissionable reactions taking place in the stellar crucibles of the universe.

The Cycloid-Space-Curve-Motion Cycle of Atomic Transitions - as discovered by the Austrian Physicist Viktor Schauberger

by Paul E Potter

Very briefly, Schauberger engineered several types of machines that would create an up-current of axially-spinning air so powerful that the up-current's drag force would speed the whole machine higher and higher into the air. Of the many different types of air turbines he made several of them boasted a thrust force of nearly 10,000 bhp - simply by moving air. Some designers have utilised Schauberger's special turbines for flight and new research suggests that there indeed is a strong case for the continuation and re-establishment of Schauberger's research into these hugely beneficial technologies.

Central to any understanding of Schauberger's levitating force is his use of the cycloid-space-curve, which initially he used to generate a dual flow of fluid through a pipe (see note 1) - of an inner axial flow which moved faster through the pipe than did its peripheral flow which was especially directed into a cycloid path next to the pipe wall (see Schauberger's patent 134543).

Stanley Meyer - www.waterfuelcell.org

Imagine running your car on water! That's correct, I said water.

Stanley Meyer did exactly that. He modified his dune buggy to run exclusively on water and water alone.

How to increase the electrical output of a nuclear generating plant by 20% --Louis Michaud's invention

by David Delaney,  September 30, 2004

Nuclear generating plants operate at a thermal efficiency of about 33%.  A plant that generates one gigawatt of electrical power discards waste heat to the environment at a rate of two gigawatts.   If 10% of the waste heat could be turned into electric power,  yielding  0.2 gigawatt of additional electrical power, the total electrical power output of the plant would rise by 20%.

There has always been a very serious obstacle to converting any of  the waste heat into electrical power.  You need a heat engine to do it--an engine that allows a working fluid to expand and cool while doing work. The efficiency of a heat engine depends on the difference between the temperature of the working fluid at the input to the engine and at the output after it has been allowed to expand and work.   The greater this temperature difference, the more work energy you can get out a given input of heat energy into the engine. The problem with the waste heat from a nuclear plant is that, although it's pretty warm in human terms, its about as cool as it can be and still be rejected efficiently to the local environment of the plant.  You cannot get any more work out of it without making it a lot cooler, and there's no efficient source of coolth near the plant to cool the output end of a heat engine enough to get more work (electricity) out of that waste heat.

Stanley Meyer

Stan Meyer's waterdriven car
 
 

 

http://www.free-energy.cc/products.html
Water fuel-cell designs http://www.keelynet.com/energy/meyerx.htm


From: http://www.free-energy.cc/electrolysis.html

Water can be broken into Hydrogen and Oxygen using electricity. Standard chemistry books claim that this process requires more energy than can be recovered when the gases are recombined. This is true only under the worst case scenario. When water is hit with its own molecular resonant frequency, using a system developed by Stan Meyers (USA) and again recently by Xogen Power, Inc., it collapses into Hydrogen and Oxygen gas with very little electrical input. Also, using different electrolytes (additives that make the water conduct electricity better) changes the efficiency of the process dramatically. It is also known that certain geometric structures and surface textures work better than others do. The implication is that unlimited amounts of Hydrogen fuel can be made to drive engines (like in your car) for the cost of water. Even more amazing is the fact that a special metal alloy was patented by Freedman (USA) in 1957 that spontaneously breaks water into Hydrogen and Oxygen with no outside electrical input and without causing any chemical changes in the metal itself. This means that this special metal alloy can make Hydrogen from water for free, forever.

Strahlturbine

1930 - Strahlturbine Schauberger's patent number 117 749: The subject of the invention is a hydropower machine, which utilizes the living energy of a jet of water for the purpose of power generation. According to the invention, the turbine wheel is a cone with corkscrew-like blades. The cone is aligned with its axis in the direction of the axis of the jet. In this way the jet of water is split and diverted out of its course and thus gives its whole living energy to the spinning cone in a way that, providing the length of the cone and the width of its base are in a correct relation to each othe

Syndicate content