"Covert Garage" - a forthcoming 3 part documentary series - two introductory videos descriptions from videos:
Energy ain't what it used to be.
Trailer for a documentary series exploring the strange world of inventors and back-yard boffins who dare to dally with the laws of science.

Another description of the rotoverter

RotoVerter is:
A remarkable piece of energy saving engineering that can be applied readily to off-the-shelf components. Utilizes an AC motor - with a modest change in the wiring, a motor rated to run at 460 volts on 3-phase, at 20 - 30 amps, can be made to run on 120 volts single phase, and on a handful of amps (5 - 7 amps). This is done, by creating a virtual 3rd phase utilizing capacitance. By tuning the capacitance, the motor can be put into a self-semiresonant condition whereby the motor runs with extreme efficiency and is cool to the touch at full rated rpm. This is a PROVEN technological advance - which can be put into operation worldwide to help stem the energy shortages reported to be on the way globally.

This modified AC motor is referred to as the RotoVerter. Several first-hand who have replicated the device are seeing amazing results as the extra voltage circulating in the capacitor bank used to create the virtual third phase, can also be utilized to charge batteries as well and other loads. The beauty of being able to run these motors in this manner, is not only the tremendous energy savings, but provides one with the ability to go SOLAR as well.

This technology is ready to be utilized now. This is to AC what Bedini is to DC, and this information needs to be distributed throughout the world. You have the power to touch millions with this vitally needed information which has been given by Hector D. Perez Torres as OPEN-SOURCE to all. So without further adeau, I wish to present the following:

Good day. My name is Ashtweth (Glen Palise), I represent Panacea-BOCAF, a non-profit organization that was founded in order to support all engineers working with alternative and suppressed energy technologies. We aim to create a physical research & development center physically located in Australia that will be immune to the current political and commercial conditions which are preventing free-energy technologies from surfacing publicly. The function of the center is to encourage and advanced social reform by speeding up the implementation of these discoveries and inventions.

Here at Panacea-BOCAF, we do research and development projects into suppressed energy technologies, also we currently have over 200 registered engineers working with us, and on-going projects in open-sourced technologies. We also have available an online university (originally created by current Panacea-BOCAF member Patrick J. Kelly) for explaining simply what projects like the Rotoverter, Joe Cell, MRA, Floyd Sweet VTA, MEG etc are all about and how to better understand their inner workings - we are also working on adding more resources to our website for better dissemination of this type of knowledge and information.

One of the most important plans that we have is taking replicated, verified working, devices to the media in order to attract grants from philanthropic foundations for the creation of the Panacea-BOCAF center for research&developmen t, this project requires help and assistance now more than ever. Many people working in the free energy/alternative/ suppressed energy scene bemoan the lack of a center for proper, funded research&developmen t, everyone is going about it on their own instead of collaborating together in a publicly known site for alternative energy advancement. To do all of this above-board, and to disclose to the media (and to the public) working open-source alternative energy and overunity devices such as the Rotoverter technology - this is our main aim, and this is what we would like to talk about on your show - also showing you video footage of research that we have uncovered, and replicated.

We have recently finished a energy suppression media script, which also shows the rotoverter technology - which was disclosed in 1999 by Hector D. Perez Torres, publicly, opensource, and with off-the-shelf parts. The cost of replicating one of these devices depend simply on if you have access to motors, capacitors, wiring and other components or not. Even if you have nothing, and purchase everything new, it is much lower than a couple of thousand dollars - and anyone can scrounge some of the materials from junkyards or from garages. This device - which we have already replicated and used, and all the others we intend to replicate in the future, needs urgent public knowledge and support - otherwise alternative energy will keep on being bought-out, threatened, suppressed and killed off (we reference the cases of Stanley Meyer, Joe Cell, John Bedini, Viktor Schauberger, Nikola Tesla, Jim Lawson, Floyd Sweet VTA and many, many others when it comes to information suppression, fund-limiting or downright threats and out-buying). This is the reason why we here at Panacea-BOCAF created this script, to inform the general public.

Thus we would like to make this available to you, and are eagerly looking forward to your response. We are also working on disclosing the rotoverter and other devices in the australian tv, and any other media appointments that we can amass - we would like your help in further advancing knowledge about alternative and suppressed energy inventions, and since Rense already has a great history of working with John Bedini, Tom Bearden and others about their inventions, you might be very interested in what we have to say.

The 1.5 hour mediascript on energy suppression and solutions:


Here we present the rotoverter technology in a short 17minute video:


We have also created a video on rotoverter-related overunity research:

We are constantly filming video of working replications of current projects and uncovering material and information in order to replicate projects in the future. Given the subject matter on our website, I feel it would be important for panacea-bocaf and rense to work together in order to present, to your listeners and readers, these types of information.

We would love the opportunity to be on your show.

Please contact us with questions, queries or any other points of interest.

Regards Ashtweth

Joe Cell: Alex Schiffer: Update#22: Thought and fine tuning the cell via control of bubble action

Alex Schiffer JoeCell Update 22, 01-04-2007
"Thought and fine tuning the cell via control of bubble action."

It is very easy to become entranced by the effects that a Joe cell can produce. The pursuit of the effects rather than an understanding of the energy are the end results.

I am guilty of the above, and it took me a long time to realise that unless I tackled the problem at its source (the energy) I would continue chasing my tail and never get anywhere.

Topical index of free energy related videos

PESWiki: Topical index of free energy related videos available for viewing online.

Table of contents [showhide]
1 The simplest motor
2 Royal Raymond Rife
3 Viktor Schauberger, Water, Vortex, Implosion
4 John Keely / Sympathetic Vibratory Physics
5 Nikola Tesla
6 Cymatics
7 Wilhelm Reich / Orgone
8 Tom Bearden
9 Buckminster Fuller
10 Dr. Len Horowitz
11 John Hutchison
12 Stanley Meyer
13 John Searl
14 Tom Valone
15 Others
16 Resonance, Vibration, Frequency, Acoustics
17 Thomas Townsend Brown
18 Robert A. Patterson / Ram Implosion Wing
19 JoeCell

Joe Cell + Peter Stevens Old Video, 1,5hours

Joe and Phil play with a Suzuki with out positive on the coil, also a brief discussion on the cell from a different perspective. The video ... all starts all over the place and starts with Peter playing with his test engine to get it running before adding a cell. The video chops here and there from old files but some good info.

Joe Cell - Peter Stevens 2nd visit - Charging Process

A Video of Peter Stevens explaining the process of charging a Joe Cell. This has been video'd by Damien.
This information was found on
The Video is 20min45sec long, and has been posted on 22th of May 2006.

Practical Guide to Free-Energy Devices

This is a mirror of

The purpose of this web site is to provide you with an introduction to a series of devices which have been shown to have very interesting properties and some are (incorrectly) described as 'perpetual motion' machines.

What's that you say - perpetual motion is impossible? My, you're a difficult one to please. The electrons in the molecules of rock formations have been orbiting steadily for millions of years without stopping - at what point will you agree that they are in perpetual motion?

'Swirler' Bubble Motor - Magnetically Induced Vortex

Magnetically Induced Vortex

Mirroring of some Yahoo Groups

Started archiving some Yahoo groups under


At the moment JoesCell2 and viktorschaubergergroup

The groups are also, at the moment available as zip files in that same aformentioned folder.

No search function yet but hopefully soon.


Ringorgone the movie 01-20 (Google Video)

Ringo has filmed every stage from cell assembly, installation, orgone accumulato jacket, figure eight, sea salt scum, alkaline water, press fit cone, blind plug and much more.




Joe Cell videos

JoeCell DownUnder

Joe Cell is similar to an electrolysis cell built with concentric stainless steel pipes. Generally with diameters of 1, 2, 3, and 4 inch diameters, and sometimes with a 5 inch also. Different theories of length hold that the cylinders should be between 4" and 10" long. There are many theories of how a cell works. It is generally accepted to be an Orgone Accumulator.

Joescellfreenergydevice Group

Welcome Experimentors doing what comes to make a Joe cell work Welcome joescellfreeenergydevice Group Welcome

Joe Cell Orgone Accumulator - videos

"Ringo has filmed every stage from cell assembly, installation, orgone accumulato jacket, figure eight, sea salt scum, alkaline water, press fit cone, blind plug and much more to come so keep looking here for updated links." NEW: See this node:- for these clips in Google Video

JOE CELL-strona po?wi?cona budowie ogniwa Joe'go

"Nie ma rzeczy niemożliwych! Niemożliwi są tylko ludzie!"

Witaj na stronie poświęconej budowie ogniwa Joe Cell.

BNE (Byron New Energy)


Welcome to the Byron New Energy wiki website.

This website has been set up to encourage and create not for profit international humanitarian design, development, and construction and distribution of clean renewable energy sources and machines for the Golden Age of Humanity.




BNE Mission Statement

Here is our BNE (Byron New Energy) Mission Statement:

We have started a New Energy Group in Byron Bay, Australia called Byron New Energy Group, or BNE for short. BNE Mission Statement

To establish a not for profit humanitarian group.

The group has a goal of love and selfless service to humanity at large, of researching, developing, publishing freely in the public domain for the good of humanity at large, and manufacturing, devices that use clean renewable energy sources that supply viable alternatives to those devices that use non-environmently friendly non-renewable fuels such as nuclear and fossil fuels.

Hopefully, a number of these BNE devices will be over unity (develop more power than apparently is consumed) by using generally renewable cosmic energy sources. In this way 'free' or very low cost renewable clean energy may be made available to humanity at large. This mission may thus fulfill a major requirement to enable humanity to move towards the Golden Age.

These devices will include but not be limited to making use of gravity, anti-gravity, electromagnetic, electronic, magnetic, water, hydrogen, oxygen, zero point or vacuum or radiant energy and/or cold fusion and may also include other potential sources of cosmic energy. The group will be formed by a core of active participating members who will be responsible for all group decisions.

The group will be positive and supportive and no coercion will be used and will encourage 'out of the box' thinking.

Each person will bring constructive complimentary resources to the group including enthusiasm, expertise, their time, technical skills and materials and machines, money, premises etc. etc. The group in general will interact freely and share information and resources with all and any persons and organizations that have similar aims to the group.


Joe Cell - Effects of Various Water Levels

"Joe Cell - Effects of Various Water Levels"

Joe Cell - Running an Engine on Water Pt.1

"Joe Cell - Running and Engine on Water Pt.1"

Joe Cell - Vapor Rising from the Neutral Plates

"Joe Cell - Vapor Rising from the Neutral Plates"

Joe Cell - Explanation of the Anode and Cathode Connections

"Joe Cell - Explanation of the Anode and Cathode Connections and Locations"


Re: [Joe Cell Free Energy Device] General Info

witty_76 wrote: Hi all, someone sent me the following so I thought I'd post it here.
May be of interest:

(1) The generation time of virgin orgone hungry water is extremely
long in duration - akin to having to ferment your own corn mash,
distill the dilute alcohol to a concentrate prior to powering up and
running your vehicle via alcohol as a fuel source.

(2) Your final concentrated orgone active water inhabiting your Joe
Cell is very unstable and can be destructed by electronic

Alex Schiffer - Joe Cell - Experimenters Guide to the Joe Cell

Chapter 1.

" Since corrupt people unite amongst themselves to constitute a force, then honest people must do the same "

Count Leo N. Tolstoy.


by Alex Schiffer

Intention My intention ( to the best of my ability ) is to remove some of the mystery, secrets, guesswork and plain misinformation that surrounds the construction of the " cell ". The aim is to help the constructor make a cell in a laid out, step by step, method that I employ to make my own cells. My knowledge comes from making the cells. As I have built many working cells, this experience has given me the knowledge, not by guesswork or reading someone's book or listening to second or third hand " expert " opinions. I now pass this information on to you. and it will always stay as my opinion and information until you build your own cell. Only then will you know how to make a cell, and not before!

Joe In approximately 1992 a new form of a generator was constructed in Australia. In preparation for this book, I spoke to both the designer and his fiancee, regarding my wish to give him the due credits, etc., for his 7 years of work and cooperation with all involved parties. Unfortunately due to the lunatic fringe and money grabbers that dealt with him, this poor, victimised individual has decided to relinquish any further involvement with the cell that bears his name. So in respect to his wishes, he will simply be referred to as Joe. I would simply like to say, dear Joe, that if it was not for rare individuals like you, we the vast brainwashed majority, would never find the true beauties of Mother Nature's gifts.

It is now probably to late to save Mother Earth from the years of pollution and desecration caused by the thoughtless money-grabbing multinationals. As a species, we are unique. Even a little simple bird keeps its nest clean, yet we the most intelligent of creation, destroy our only home! Yet, individuals like Joe show us that there is a better way, a simple pure way, Nature's way. Without the benefit(?) of years of dogmatic mind shrinking education, Joe found, by intuition, how to ask Nature a question in such a way that it answered. The answer was a method of powering machinery without the use of our primary resources or the creation of pollution. This method is well known to the select few and the technology has been around for centuries. Joe has made a crude easy to build version of this generator. The generator is called a Joe cell.

Syndicate content