USA

It is characteristic of fundamental discoveries

It is characteristic of fundamental discoveries, of great achievements of the intellect, that they retain an undiminished power upon the imagination of the thinker. The memorable experiment of Faraday with a disc rotating between two poles of a magnet, which has borne such magnificent fruit, has long passed into every-day experience; yet there are certain features about this embryo of the present dynamos and motors which even today appear to us striking, and are worthy of the most careful study.

Juha Hartikka: Käytämmekö tulevaisuudessa ilmaista energiaa? Kvanttienergia on uusi tapa lypsää atomia

Energia-alalta tihkuu kummia pikku-uutisia. Jos kehittelyn alla olevat energiatekniikat osoittautuvat käytännössä toimiviksi, ne tulevat olemaan käänteentekeviä sekä ympäristömme että energian edullisuuden kannalta ja lisäksi kaikkien ulottuvilla. Miltä tuntuisi vaikkapa oma pieni voimala, joka tuottaisi ilmaiseksi energiaa talon lämmitykseen? Tai että auto kulkisi tankkaamatta ja saastuttamatta?

Radiant Energy FATE Magazine Article, September, 1956

http://nuenergy.org/alt/fate1956.htm

ALCHEMIST 1956

by Gaston Burridge


A salt Lake City man claims discovery of a new form of energy with which he performs metallurgical miracles.

Legend, if not history, has it that the alchemists of old searched for two things; how to make gold from baser metals, especially lead, and how to produce an elixir of life.

Some persons believe the alchemists were not searching for a new formula for making gold, but rather looking for information they believed was once known, then lost.

Free Electricity Generated From The Radiant 'Cosmos'

This page was converted to HTML-format from cosmos.pdf which I found at nuenergy.org

A group of engineers gathered in 1936 to witness a Moray experiment where a bank of
light bulbs, and several appliances were operated with electricity taken directly from a "radiant source. "

Free Electricity Generated From The Radiant 'Cosmos'

Generating electricity without-burning fuels, atomic energy or using the sun's rays is not only possible - it's been done!

More than 40 years ago Dr. Thomas Henry Moray of Salt Lake City did it. He demonstrated on numerous- occasions that he could generate electric power from a natural source he called "radiant energy."

Par ahead of his time, Dr. Moray used a simple antenna, solid state electronic circuitry and specially designed cathode ray tubes to generate amazingly large amounts of useful electricity from a seemingly mystical source.

During the 1930's he demonstrated his invention on land, in the air and even under the water.to the sheer astonishment of engineers and scientists.

Jane Cobbald: Conversation with Frau Ingeborg Schauberger

http://www.implementations.co.uk/ the original is here

Walter said help "Nature, help the trees. We have to have many more trees, more woodland. The first task for the woodland is to bring the water into existence."

Frau Schauberger is the widow of Walter, Viktor Schauberger’s son. She still lives in the family home in Bad Ischl, upper Austria. Each time I saw her she was wearing the traditional Austrian clothes, the close fitting tailored jacket and a dirndl skirt. Although she is less than five feet tall, she has a powerful presence and shows a sharp intelligence. She speaks some English, more than my German, so our conversation was mainly in English. She was concerned that she would not be able to express herself well in English, so at each meeting we had an interpreter sitting with us. At the time of our conversation, she was 89 years old.

 

 

 

 

 

Notes: Tom Bearden [notes from his video]

these are from the disclosure project interview of tom bearden

Notes:

Tom Bearden:

Extracting electromagnetic energy from a vacuum . . .
The current electrodynamics model does *not* allow this to happen.
-It does not allow you to extract excess energy from a vacuum in order to power your load.
-It does not allow you to make a "cell" powering system.

Why doesn't electromagnetics [model] allow it to be done?
- Bearden and those involved w/ the project studied the fundamentals of electronics.

Laura Lee: Callum Coats radio interview

Callum Coats       
120295.asx (http://www.lauralee.com/audio/asf/120295.asf 4.3 mb) (mirrored here)

Description
Callum spent 30 years studying Schauberger's work with the natural energy flow of water and how unrecognized principles of Nature can be utilized for life enhancement. His video on the subject is a popular detailed overview.

The Viktor Schauberger [flying disc] Models

The Viktor Schauberger Models

taken from the book "Stevens - Hitler's Flying Saucer - A Guide to German Flying Discs of the Second World War (2003), page 121-, available on Amazon, here


An Austrian, Viktor Schauberger was first and foremost a naturalist. His primary focus was water as found in naturally occurring streams, rivers and lakes. In observing the movement of water he formulated his own ideas about its movement and energetic properties. They are applicable in air also. His ideas are guite contrary to accepted ideas, both then and now and are even now imperfectly understood and debated. These ideas involved the vortex which was the way Schauberger believed that water naturally flowed both in the earth and in streams. Schauberger believed that energy naturally flowed in a vortex but that this movement was only visible through another medium such as water or air. This discussion will first focus on theories of why and how the Schauberger saucer model flew and then recount the sequence of events in Schauberger's involvement with flying discs.

Bookstore - Viktor Schauberger, Living Water and Natural Harmonies

Mail-Order Service for the Orgone Biophysical Research Lab

among others: 

* LIVING WATER, Viktor Schauberger and the Secrets of Natural Energy, by OLOF ALEXANDERSSON.

* LIVING ENERGIES, Viktor Schauberger's Brilliant Work with Natural Energy Explained, by CALLUM COATS.

* Eco-Technology Series Volume 1 - THE WATER WIZARD: The Extraordinary Properties of Natural Water, by VIKTOR SCHAUBERGER, translated and edited by CALLUM COATS.

* Eco-Technology Series Volume 2 - NATURE AS TEACHER: New Principles in the Working of Nature, by VIKTOR SCHAUBERGER, translated and edited by CALLUM COATS.

* Eco-Technology Series Volume 3 - THE FERTILE EARTH: by VIKTOR SCHAUBERGER, translated and edited by CALLUM COATS.

* Eco-Technology Series Volume 4 - THE ENERGY EVOLUTION: by VIKTOR SCHAUBERGER, translated and edited by CALLUM COATS. 

* SACRED LIVING GEOMETRY: The Enlightened Environmental Theories of Viktor Schauberger - Double Video, Presented by CALLUM COATS.

* ON THE TRACK OF WATER'S SECRET: From Viktor Schauberger to Johann Grander, by Hans Kronberger & Siegbert Lattacher. 

* THE MESSAGE FROM WATER - Telling Us to Take A Look At Ourselves, by Masaru Emoto.

* MESSAGES FROM WATER (Vol. 2), by Masaru Emoto. 

* THE POWER OF LIMITS: Proportional Harmonies in Nature, Art, and Architecture, by Gyorgy Doczi. 

* THE OLD WAY OF SEEING, How Architecture Lost Its Magic (And How to Get It Back), by Jonathan Hale

Stanley Meyer - www.waterfuelcell.org

Imagine running your car on water! That's correct, I said water.

Stanley Meyer did exactly that. He modified his dune buggy to run exclusively on water and water alone.

EDAV PROJECT - WAVEPLATE MECHANICS PART II

EDAV PROJECT

WAVEPLATE MECHANICS PART II

FEBRUARY 3, 2004

click here for EDAV Project Part l

click here for EDAV Project Part ll

click here for EDAV Project Part lll

>>  click here for Waveplate Mechanics  <<
 

The continued research into the action of the waveplates brings forth many known scientific rules which I will begin to address in these writings.

Also, Victor S. especially noted that the waveplates be fabricated out of copper alloy material, with a silver coated anodizing. The egg shaped housing is also fabricated out of copper. So, of course the logical question is why. This will also be addressed in these writings.

To begin with, as you start the spin of the waveplates, you will create a vacuum of air to be sucked across the plates toward the outside diameter. This will now start a rotation of normal air molecules circulating counterclockwise around the inside of the enclosed housing. Now anytime you enclose circulating air mass in an enclosed chamber, the normal air friction between the air molecules and the housing will create heat. The recirculating air, spinning into itself creates no friction, so it is the subsequent impact that creates this heat. Heat always creates pressure. So now we have a building of pressure also inside the egg housing. The normal resistant air has to come from somewhere so a velocity cone is assembled into the center of the housing to direct incoming cool air into the spinning plates. See DIAGRAM 1. Now the air has to have an escape method so at the top of the egg housing and attached to the center mounted velocity cone is an exhaust turbine that is connected via the velocity cone back to the waveplates. As the heated air begins to build pressure, this pressure is naturally funneled into the exhaust turbine. The resulting pressure is now used to add velocity back down the cone into the waveplates. Now, the resulting airflow inside begins to increase in temperature to about 300-500 degrees F. within a few minutes.

This is where things begin to get interesting. The press formed plates after assembly create a waveform intersticial space. Both plates are maintained at a distance at the inside diameter and decrease in a uniformed distance all the way to the outside diameter. Now the exact spacing is unknown at this time. The slits cut into the upper plates let the outside circulating air get sucked into the area between the waveplates. Rotational velocity creates the suction or vacuum. So after a period of time we now have normal resistant air in the chamber getting very hot, and this air is being sucked right back into the waveplates. Lets take normal water and cool it to a crisp 42 degrees and now inject this cooled water into the center of the intersticial area. We will now create a normal thunderstorm to happen which I will denote as a natural endothermic reaction. Science describes an Endothermic Reaction to be: “Cold tries to take energy away from hot and creates an expansion of pressure”. Victor talks about this same thing on page 87-88, “Heat is first generated thru friction. The heat is immediately absorbed by the water and in the process a physical vacuum is created. Which then gives rise to the emergence of inner atomic rays. Due to the absorbed heat, the free dissolved oxygen still present in the water becomes aggressive owing to the present of the vacuum. Through the encounter of the mutually opposed, contra-directionally propagated, excited rays, the precondition for the marriage is created, the child of this union is organic, or cold light.

Now, not a lot of water need be injected to cause this to happen and if this water is atomized at the injection point, a better reaction is created. In between the waveplates we now have created a pressurized state to develop on top of the rotational vacuum. Whereby creating the repulsion state to come about.

Lets look at a normal garden hose. Usually a garden hose has about 40 lbs of pressure behind it to flow the water. By installing a squeeze nozzle at the end, the pressure in the hose builds, and when you squeeze the nozzle and inject all that pressure thru a very small orifice, a stream of water up to 20 feet is ejected. Now lets put this same analogy into the waveplates. We have produced now a pressure inside the waveplates that is vacuumed to the outside diameter by rotational velocity and now all is required is a small orifice around the outside diameter to create the repulsion energy. As the rotation increases, pressure increases, and when the repulsion effect happens the air molecules create their expansion on exiting the orifice at the outside diameter subsequently ejecting against the turbine blades which are cocked at a 30 degree angle. This results in a increase of rotation of the waveplates along with the expansion of air pressure up to 115 times. The ejection of the repulsed air will now also increase the pressure inside the egg housing increasing the pressure against the exhaust blades creating even more spin back into the waveplates. We now have created a living breathing motor, just as V.S. has talked about. By siphoning off the rotation of the center shaft and reducing the rpm thru a reduction drive now creates H.P. Rotational control can also be done by creating a mechanical devise to control the turbine blade angle to increase or decrease spin, Much like an adjustable pitch propeller on an aircraft.

But every engine will produce a by product from a reaction. Combustion engines that burn gasoline and oxygen produce carbon monoxide. The repulsion engine will produce a hydrogen byproduct, after separating the hydrogen molecule from the oxygen. But now this hydrogen molecule is being recirculated back thru the waveplates along with the normal resistant air and we may now create sub-atomic hydrogen. So now our calculations are changed from normal resistant air molecules to heated hydrogen ionized gas circulating around the egg chamber. A completely different set of temp/pressure/ vacuum equations are justified because of the now changing gas product.

Electrical emissions are also a by-product of this wonderful device. Since the waveplates are isolated away from the center shaft, a positive charge of electricity is going to build up on the waveplates. This is also explained by “When the hydrogen atom is caused to impact a copper atom at a high rate of acceleration, then the copper atom will capture the last remaining electron of the hydrogen atom”. This now creates the basis for ionized hydrogen or sub-atomic hydrogen.

A Hydrogen Ion: Having a kinetic energy of 1 electron volt, would have a velocity of 10.85 x 10(3) m/sec or nearly 6.1 miles per second (32,208 ft/sec. or 21,954 mph.). As long as ionized hydrogen does not combine with other gases like 02 it will be H or monatomic hydrogen. It will occupy twice the space of H2 and have twice the lifting power. (.014) Hydrogen gas on the other hand has a average molecular speed of 1693 m/sec or 5554.73 ft/sec @32 degrees F. or 0 degrees Centigrade. That is .07 lbs lift per cubic foot of gas.

The blue hue effect seen outside the egg housing is the formation of monatomic hydrogen which has lost its last remaining electron to the copper waveplates. This again is known well in the circle of science. Most cases of UFO sightings will talk about a humming noise or the blue hue noticed around the top of the circular vehicles.

The waveplates have to be isolated away from the center shaft, because this charge is not allowed to be grounded. Noticed, by more than one observer who has been able to create this effect is the strong static lightning bolts seen shooting out of the repulsion housing. These build up of charges can be captured and manipulated to capacitors and Static/AC/DC transformers for production into usable electrical current. This current can be used in operation of the vehicle or used to process electrical energy for residential use. Imagine running your repulsion system on the water supplied to your house. Static electricity is also the basis for electronic force fields.

V.S. wrote that on average, implosive forces are 127 times more powerful than explosive forces. Tesla’s 12” multi bladed turbine produced a possible 125 hp while Schaubergers 12” waveplates produced 1250 hp. (10 times more) Small implosion machines of 8” diameter rotating at 10,000 rpm. Can lift 57 tons and at 20,000 rpm. 228 tons.

So a 18” diameter should connect with repulsion energy at about 1500 rpm with an outside diameter velocity of 14,130 ft/min. or a speed of 282.6 mph. A total rpm range can easily exceed 10,000 rpm. So this could generate an enormous lift range totally incomparable to anything in existence even today. Air driven implosion machines specify air speeds of 124 mph. (124mph x 5280ft = 654720/60 min. = 10912/60 sec = 181.86 fps.

Wind velocity, must exceed this amount before repulsion happens. (pg. 134 fig.21) The greater the rpm, the more lift capability. So the 18” waveplate rotating at 10,000 rpm has an outside velocity of 1570 fps. Exactly how much lift capacity (suction), unknown. The actual volume of cubic feet of air moving thru the repulsion unit is staggering.

Hydrogen, being a by-product of the repulsion unit does not destroy the atmosphere like carbon monoxide. It actually enhances the environment.” The aeriform substances transformed in the machine create very high grade nitrogenous material which increases the vitality and germinating capacity of the vegetation”. V.S. PG. 116 Energy Evolution

Wave Frequency’s

Wave frequencies are also emitted from the repulsion unit upon entering the repulsion state. These frequencies are denoted to be in the 8 megahertz range. Much has been found regarding this information and will write more on this at a latter time.

Waveplate Technology

There are numerous ways of restructuring the waveplate system to cause many forms of energy to come about. I will explain several of these that were written in “The Energy Evolution” book.

Sonoluminescence

from http://www-phys.llnl.gov/N_Div/sonolum/

Sonoluminescence: an Introduction

About the LLNL sonoluminescence experiment

What is sonoluminescence?

Sonoluminescence is the emission of light by bubbles in a liquid excited by sound. It was first discovered by scientists at the University of Cologne in 1934, but was not considered very interesting at the time.[1]

In recent years, a number of researchers have sought to understand this phenomenon in more detail. A major breakthrough occurred when Gaitan et al. were able to produce single-bubble sonoluminescence, in which a single bubble, trapped in a standing acoustic wave, emits light with each pulsation.[2] Before this development, research was hampered by the instability and short lifetime of the phenomenon.

John R.R. Searl

SEG - Searl's Electromagnetic Generator

from: http://pesn.com/2005/05/22/6900100_Searl_Effect/


"...Even more dramatic effects including concentric thermal “walls” were reported. These rings of magnetic fields around the device felt discernibly colder to the physical senses in addition to registering 6-8 degrees Celsius below the ambient temperature. And when the laboratory was darkened, the Russian scientists observed an unusual toroidal field of blue-pink glowing luminescence around the converter when it was in operation. Godin and Roschin admit they cannot explain these phenomena using the conventional models of physics. Please see: http://www.searleffect.com/free/russianseg/russianseg.htm..." ' "...And orgone energy is said to manifest as a blue glow. Could this be part of what the Russians observed in their glowing blue-pink coronal discharge? And what is the pink part? So far nobody has even offered a theory including the Russian scientists who could not make a guess themselves! ..."

Stanley Meyer

Stan Meyer's waterdriven car
 
 

 

http://www.free-energy.cc/products.html
Water fuel-cell designs http://www.keelynet.com/energy/meyerx.htm


From: http://www.free-energy.cc/electrolysis.html

Water can be broken into Hydrogen and Oxygen using electricity. Standard chemistry books claim that this process requires more energy than can be recovered when the gases are recombined. This is true only under the worst case scenario. When water is hit with its own molecular resonant frequency, using a system developed by Stan Meyers (USA) and again recently by Xogen Power, Inc., it collapses into Hydrogen and Oxygen gas with very little electrical input. Also, using different electrolytes (additives that make the water conduct electricity better) changes the efficiency of the process dramatically. It is also known that certain geometric structures and surface textures work better than others do. The implication is that unlimited amounts of Hydrogen fuel can be made to drive engines (like in your car) for the cost of water. Even more amazing is the fact that a special metal alloy was patented by Freedman (USA) in 1957 that spontaneously breaks water into Hydrogen and Oxygen with no outside electrical input and without causing any chemical changes in the metal itself. This means that this special metal alloy can make Hydrogen from water for free, forever.

Klimator - Stewart Mackenzie

http://groups.yahoo.com/group/viktorschaubergergroup/message/1142

From: "Curt Hallberg" <curt.hallberg@...>
Date: Tue Aug 23, 2005  12:35 pm
Subject: SV: [viktorschaubergergroup] Curt -> Klimator

Hi Stewart!

OK, I will TRY to answer your questions below! Now, I some cases we simply do not have the correct information. Then we must use our technical skill and imagination. An other thing we must do is to learn to think how Viktor Schauberger think. First read the litterature, doing this try to remember the most basic things about Implosion. Then maybe the most important: DO SOMETHING PRACTICAL!! Just start to play with water make spirals, or look into the nature in water falls etc. But DO something practical!!!

Victor Schauberger's Biography

based on http://www.schauberger-books.org.uk/mainframe.shtml

 

1885 Viktor Schauberger born in Holzschlag, Upper Austria, into a family with a long tradition of caring for the unspoilt Alpine forests.

1914-18 Soon after the birth of his son Walter, Viktor was enlisted in the Kaiser's army.

1919 Appointed forest warden and gamekeeper.

Vortex Water Systems

Vortex Water Systems

This is not new technology. It has been around for centuries. The Greeks first used it around 2000BC.

This is not a water softener. Nor is it Magic. This is: State-of-the-art Water Treatment for Rural or City applications.

Used for Many Applications - Residential, Agricultural, Commercial, and Industrial.

Benefits:

* A better tasting water.
* No more ugly stains on shower    walls and toilets.
* White clothes can be white again.
* Less soap and detergent required in    the laundry and dishwasher.
* Hard water spots and deposits    easier to clean - less chemicals    required to remove.
* Will not harm septic systems

 

 

Research and development of vortex water systems for rural private wells has been conducted in the field since 1998. Lab experiments and research are conducted in Malmo, Sweden by a team of researchers. Hundreds of systems are in operation in the United States, ranging in application from private wells to apartment buildings and mobile home parks. The systems are designed to require little to no scheduled maintenance. The nature of the problem water defines system design, which can be modified to achieve desired results. Field experience and lab experiments have provided positive results in the eradication of E.coli, algae, fungus, molds, anaerobic bacteria, coliform, cryptosporidium, and legionella. The vortex process places bacteria and viruses under high pressure (hydrocyclones) followed by a vacuum, which causes them to disintegrate.

 


http://www.sulis-health.co.uk/vs/links.shtml
 
One such is Dan Reese, who developed Vortex Water Systems in Texas, inspired by reading Alexandersson's Living Water. They are designed to solve the increasing problem of pollution of wells in the American South, by unwanted salts and minerals, and to restructure the water so that it feels smooth, uses less soap and tastes pure. The Vortex system has no moving parts or filters, does not use chemicals and is driven only by the force of the well pump. It was found that the system could be expanded to service as many as 76 homes from one well. A system is now being tested for removing mineral salts from a salt intrusion well, and a larger farm system to help with the problem of cotton rot and to use less water to grow the same amount of crops. These will be major breakthroughs for the industry.

 


http://groups.yahoo.com/group/viktorschaubergergroup/message/1076 

--- Curt Hallberg <curt.hallberg@...

The last two years I have been working with water purifyers utilising V. S. theories. Mostly it is Dan Reeses Vortex System I have tested and been trying to develop further. This has also lead to other vortex treaters for water.


An Introduction to Vortices and Vorticity - vortex.pdf

Prof. A.H. Techet
Department of Ocean Engineering
Massachusetts Institute of Technology
Cambridge, MA 02139

To better understand the fluid forcing produced by fish when they are swimming it is necessary to first discuss the basic concept of a vortex and vorticity. A vortex arises when flow encircles a central point. Examples of where vortices occur in nature include: whirlpools, tornados, ocean eddies, blood flow through heart valves, and flow swirling behind rocks in a river current. Vortices appear in engineering fluid applications as well: flow around offshore platforms, tip-vortices from aircraft wings, helical vortices in propeller wakes and helicopter rotors. In general, vortices can form when flow passes any object with a non-streamlined shape or a sharp corner, and separates from the body.

Part 1B Engineering: Biological and Medical Engineering, Fish Swimming, Lecture 1 -2 - Trout_propulsion.pdf

..."Evidence suggests that many fish exploit the natural instability of the flow energetics to assist them in propulsion and maneuvering. By tuning their own kinematics, the fish is able to swim efficiently, to generate large thrust and turning forces, and to move silently through the flow with minimal wasted energy...."

Ere many generations pass - mankind will succeed in attaching their machinery to the very wheelwork of nature.

Ere many generations pass, our machinery will be driven by a power obtainable at any point of the universe. Throughout space there is energy. Is this energy static or kinetic? If static, our hopes are in vain; if kinetic - and this we know it is, for certain - then it is a mere question of time when men will succeed in attaching their machinery to the very wheelwork of nature.

Virtues and Failings

Our virtues and our failings are inseparable, like force and matter. When they separate, man is no more.

The Future is Mine

"Let the future tell the truth, and evaluate each one according to his work and accomplishments. The present is theirs, the future, for which I have really worked, is mine."

Andre Popoff

"...http://www.pureenergysystems.com/academy/papers/Evolution_E.V.Gray_Circuit_Topology/index.html This situation supports the idea that Mr. Gray didn't discover or develop this technology from scratch. It is believed; by Mr. Norm Wooten and others, that Mr. Gray received this information almost fully developed from Mr. Andre Popoff'. Mr. Popoff was a Russian immigrant who was said to have had direct contact with Nicola Tesla during his declining days in New York City. We will probably never be able to fully reverse engineer this lost technology from the patent documents or the surviving photos. At best, we can only hope to extract some fundamental technical principles present in the available documents and attempt to develop the rest from detailed experimental analysis...."

Tesla - Schauberger Vortex/Implosion connection

 

There must be a connection?

 


http://www.shout.net/~bigred/UnlimEng.html "...Tesla was sure he could devise an engine which was turned not through oil combustion nor through stored electricity, but by magnetic field actions alone. His "magnetic vortex motors" baffled electrical engineers. ..."

"...Tesla also pioneered "broadcast electricity," a way to send electricity through space without wires. He challenged prevailing notions of electricity, defining space as "that which conducts electricity" and claiming that "space flowing electricity" is the real electricity and that it is not made of electrons. Space-flowing electricity fills all of "space" ("that which conducts electricity") and is a vast reservoir of unsurpassed power. [1]..."

Syndicate content