Doug Konzen - Advanced Electric Pulse Motor
58 Million U.S. Dollars to Alternative Energy Publicity/Picketing, No Dollars to Research&Developers?Submitted by esaruoho on July 12, 2008 - 23:13
The billionaire Texas oilman T Boone Pickens today unveiled a $58m PR campaign aimed at convincing Americans to replace petrol with natural gas and wind.
The Pickens Plan, as the 80-year old has dubbed his effort, would involve an estimated $1tn government investment to substitute wind for the 22% of US electricity now derived from natural gas.
Free Energy - Making the Impossible Possible - A New Physics for a New Energy Source by Jeane Manning
Rouva Schauberger on Walterin, Viktor Schaubergerin pojan, leski. Hän asuu yhä perheen kodissa Bad Ischlissä, pohjoisessa Itävallassa. Jokaisella tapaamiskerrallamme hänellä oli päällään perinteiset itävaltalaiset vaatteet, hyvin istuva räätälöity jakku ja dirndl-hame. Vaikka hän on alle 150 senttiä pitkä, hänellä on vaikuttava ilmestys ja hän on hyvin älykäs. Hän puhuu jonkin verran englantia, paremmin kuin minä saksaa, joten keskustelumme käytiin enimmäkseen englanniksi. Hänellä oli kuitenkin huolenaiheenaan se, ettei hän osaisi ilmaista itseään hyvin käyttämällä englantia, joten seurassamme oli tapaamisillamme myös tulkki. Keskustelumme aikaan hän oli 89-vuotias.
Kiitos että suostuit puhumaan minulle muistikuvistasi Viktor Schaubergeristä.
- Goethe puhui todellisuuden ja runouden erosta. Suuri runo voi kummuta todellisuuden pienestä siemenkodasta, ytimestä. Haluan kertoa todellisesta Viktor Schaubergeristä sellaisena kuin minä hänet tunsin. Nykyään ei ole enää monta ihmistä elossa jotka tunsivat oikean Viktor Schaubergerin.
- Tunsin Viktorin vain lyhyen ajan, vuodesta 1952 siihen saakka kunnes hän kuoli vuonna 1958. En viettänyt paljoakaan aikaa Viktorin kanssa. Walter ja minä asuimme Bad Ischlissa, hän asui Linzissä.
- Hän oli yksi merkittävimpiä 1900-luvulla eläneitä ihmisiä. Mutta siihen aikaan kun opin tuntemaan hänet, hän oli hyvin pettynyt moniin asioihin. Mikään ei muuttunut hänen elämänsä aikana;. hänen ideansa kiehtoivat monia, mutta harvat ihmiset pystyivät toteuttamaan ne käytännössä.
Schauberger-perheellä on pitkä traditio työskentelystä metsissä. Tekeekö kukaan perheen jäsenistä enää työtä metsien parissa?
- Viktor oli viimeinen. Hän oli varttunut Linzin pohjoisosassa, alueella joka on alkuperäistä metsää vielä nytkin. Tämä on harvinaista Itävallassa näinä päivinä. Hän oli sotilaana neljä vuotta ensimmäisessä maailmansodassa. Hän taisteli Venäjällä, Italiassa, Serbiassa ja Ranskassa, ja haavoittui. Sodan jälkeen hän työskenteli luonnonvaraisissa metsissä vuoteen 1924, sen jälkeen hänen uransa metsänhoitajana päättyi. Tämän jälkeen hän rakensi tukki-kouruja (log-flume) (hänen ensimmäinen keksintönsä, joka toi hänet laajemman yleisön tietoisuuteen), hänet kutsuttiin työskentelemään Wieniin. Hän oli viimeinen perheestään joka työskenteli metsissä. Nykyään kukaan ei tee sellaista työtä. Enää ei metsästetä ja kukaan ei myöskään työskentele enää luonnonvaraisissa metsissä.
Mistä Walter ja Viktor puhuivat?
Walter sanoi "Auta luontoa, auta puita. Meillä on pakko olla paljon enemmän puita, enemmän metsiä. Metsien ensimmäisenä tehtävänä on tuottaa vettä. Mitä me voimme tehdä luonnon hyväksi, mitä me voimme tehdä puiden hyväksi, ja mitä voimme tehdä puustolle ja vedelle kokonaisuutena?" Tästä hän aina puhui.
Tämä oli merkittävän teollisuuskasvunaikaa, niin kutsuttua saksalaisen sodanjälkeisen talousihmeen aikaa. Kaiken piti olla suurempaa ja parempaa. Viktor ja Walter olivat sitä mieltä, ettei suurempi ja parempi ole aina hyvästä. He sanoivat, että meidän pitää katsoa sinne, mihin asiat keskittyvät, mikä on olennaisinta, mikä on tärkeintä kaikelle elämälle. Viktorille ja Walterille tämä oli tärkein asia. Kuinka he pystyisivät saamaan tämän idean viestitettyä niin, että ihmiset pystyisivät ymmärtämään sen.
IET-Community: Proceedings of the 1st International Workshop On Natural Energies (IWONE) (9.3-11.3.2001)Submitted by esaruoho on June 17, 2006 - 11:23
Lasse Johansson of IET-Community has allowed the mirroring of these Proceedings on MERLib.org. Thank you Lasse!
THE LIFE AND WORKS OF VIKTOR SCHAUBERGER
Date: 08-09 June 2002
Location: PKS Villa, Bad Ischl, Austria
Speakers: Callum Coats (main speaker)
– Various topics on the works of Viktor Schauberger (VS)
- Research into German flying saucer project.
- How he obtained documents and prototypes from Karl Gerchsheimer.
Walter said help "Nature, help the trees. We have to have many more trees, more woodland. The first task for the woodland is to bring the water into existence."
Frau Schauberger is the widow of Walter, Viktor Schauberger’s son. She still lives in the family home in Bad Ischl, upper Austria. Each time I saw her she was wearing the traditional Austrian clothes, the close fitting tailored jacket and a dirndl skirt. Although she is less than five feet tall, she has a powerful presence and shows a sharp intelligence. She speaks some English, more than my German, so our conversation was mainly in English. She was concerned that she would not be able to express herself well in English, so at each meeting we had an interpreter sitting with us. At the time of our conversation, she was 89 years old.
http://groups.yahoo.com/group/viktorschaubergergroup/message/1443 There are some attempts to build replicas! First there is Mr. Klaus Rauber and the group around him. Klaus Rauber is giving out the paper Implosion (in German) and also have some Implo-meetings. As far as I know they have not been very succesfull as the copper plates seems to bend in speeds around 8000 rpm. Then one person in Norway (Mr. Olav Uleberg) have built a replica. The exact outcome from these replicas is still unknown. Then of course there is the real thing: The original Repulsin that Richard Feierabend found in Texas. It is still in US. Regarding information on this machine I strongly recomend "The Living Water" by Mr. Olof Alexandersson where the German version is the best. Then Callum Coats books in general but especially "Energy Evolution". Reda these books before you got to the net as there is a lot of miss understanding and erratic information. Regards, //Curt
The Viktor Schauberger Models
taken from the book "Stevens - Hitler's Flying Saucer - A Guide to German Flying Discs of the Second World War (2003), page 121-, available on Amazon, here
An Austrian, Viktor Schauberger was first and foremost a naturalist. His primary focus was water as found in naturally occurring streams, rivers and lakes. In observing the movement of water he formulated his own ideas about its movement and energetic properties. They are applicable in air also. His ideas are guite contrary to accepted ideas, both then and now and are even now imperfectly understood and debated. These ideas involved the vortex which was the way Schauberger believed that water naturally flowed both in the earth and in streams. Schauberger believed that energy naturally flowed in a vortex but that this movement was only visible through another medium such as water or air. This discussion will first focus on theories of why and how the Schauberger saucer model flew and then recount the sequence of events in Schauberger's involvement with flying discs.
WAVEPLATE MECHANICS PART II
FEBRUARY 3, 2004
>> click here for Waveplate Mechanics <<
Also, Victor S. especially noted that the waveplates be fabricated out of copper alloy material, with a silver coated anodizing. The egg shaped housing is also fabricated out of copper. So, of course the logical question is why. This will also be addressed in these writings.
To begin with, as you start the spin of the waveplates, you will create a vacuum of air to be sucked across the plates toward the outside diameter. This will now start a rotation of normal air molecules circulating counterclockwise around the inside of the enclosed housing. Now anytime you enclose circulating air mass in an enclosed chamber, the normal air friction between the air molecules and the housing will create heat. The recirculating air, spinning into itself creates no friction, so it is the subsequent impact that creates this heat. Heat always creates pressure. So now we have a building of pressure also inside the egg housing. The normal resistant air has to come from somewhere so a velocity cone is assembled into the center of the housing to direct incoming cool air into the spinning plates. See DIAGRAM 1. Now the air has to have an escape method so at the top of the egg housing and attached to the center mounted velocity cone is an exhaust turbine that is connected via the velocity cone back to the waveplates. As the heated air begins to build pressure, this pressure is naturally funneled into the exhaust turbine. The resulting pressure is now used to add velocity back down the cone into the waveplates. Now, the resulting airflow inside begins to increase in temperature to about 300-500 degrees F. within a few minutes.
This is where things begin to get interesting. The press formed plates after assembly create a waveform intersticial space. Both plates are maintained at a distance at the inside diameter and decrease in a uniformed distance all the way to the outside diameter. Now the exact spacing is unknown at this time. The slits cut into the upper plates let the outside circulating air get sucked into the area between the waveplates. Rotational velocity creates the suction or vacuum. So after a period of time we now have normal resistant air in the chamber getting very hot, and this air is being sucked right back into the waveplates. Lets take normal water and cool it to a crisp 42 degrees and now inject this cooled water into the center of the intersticial area. We will now create a normal thunderstorm to happen which I will denote as a natural endothermic reaction. Science describes an Endothermic Reaction to be: “Cold tries to take energy away from hot and creates an expansion of pressure”. Victor talks about this same thing on page 87-88, “Heat is first generated thru friction. The heat is immediately absorbed by the water and in the process a physical vacuum is created. Which then gives rise to the emergence of inner atomic rays. Due to the absorbed heat, the free dissolved oxygen still present in the water becomes aggressive owing to the present of the vacuum. Through the encounter of the mutually opposed, contra-directionally propagated, excited rays, the precondition for the marriage is created, the child of this union is organic, or cold light.
Now, not a lot of water need be injected to cause this to happen and if this water is atomized at the injection point, a better reaction is created. In between the waveplates we now have created a pressurized state to develop on top of the rotational vacuum. Whereby creating the repulsion state to come about.
Lets look at a normal garden hose. Usually a garden hose has about 40 lbs of pressure behind it to flow the water. By installing a squeeze nozzle at the end, the pressure in the hose builds, and when you squeeze the nozzle and inject all that pressure thru a very small orifice, a stream of water up to 20 feet is ejected. Now lets put this same analogy into the waveplates. We have produced now a pressure inside the waveplates that is vacuumed to the outside diameter by rotational velocity and now all is required is a small orifice around the outside diameter to create the repulsion energy. As the rotation increases, pressure increases, and when the repulsion effect happens the air molecules create their expansion on exiting the orifice at the outside diameter subsequently ejecting against the turbine blades which are cocked at a 30 degree angle. This results in a increase of rotation of the waveplates along with the expansion of air pressure up to 115 times. The ejection of the repulsed air will now also increase the pressure inside the egg housing increasing the pressure against the exhaust blades creating even more spin back into the waveplates. We now have created a living breathing motor, just as V.S. has talked about. By siphoning off the rotation of the center shaft and reducing the rpm thru a reduction drive now creates H.P. Rotational control can also be done by creating a mechanical devise to control the turbine blade angle to increase or decrease spin, Much like an adjustable pitch propeller on an aircraft.
But every engine will produce a by product from a reaction. Combustion engines that burn gasoline and oxygen produce carbon monoxide. The repulsion engine will produce a hydrogen byproduct, after separating the hydrogen molecule from the oxygen. But now this hydrogen molecule is being recirculated back thru the waveplates along with the normal resistant air and we may now create sub-atomic hydrogen. So now our calculations are changed from normal resistant air molecules to heated hydrogen ionized gas circulating around the egg chamber. A completely different set of temp/pressure/ vacuum equations are justified because of the now changing gas product.
Electrical emissions are also a by-product of this wonderful device. Since the waveplates are isolated away from the center shaft, a positive charge of electricity is going to build up on the waveplates. This is also explained by “When the hydrogen atom is caused to impact a copper atom at a high rate of acceleration, then the copper atom will capture the last remaining electron of the hydrogen atom”. This now creates the basis for ionized hydrogen or sub-atomic hydrogen.
A Hydrogen Ion: Having a kinetic energy of 1 electron volt, would have a velocity of 10.85 x 10(3) m/sec or nearly 6.1 miles per second (32,208 ft/sec. or 21,954 mph.). As long as ionized hydrogen does not combine with other gases like 02 it will be H or monatomic hydrogen. It will occupy twice the space of H2 and have twice the lifting power. (.014) Hydrogen gas on the other hand has a average molecular speed of 1693 m/sec or 5554.73 ft/sec @32 degrees F. or 0 degrees Centigrade. That is .07 lbs lift per cubic foot of gas.
The blue hue effect seen outside the egg housing is the formation of monatomic hydrogen which has lost its last remaining electron to the copper waveplates. This again is known well in the circle of science. Most cases of UFO sightings will talk about a humming noise or the blue hue noticed around the top of the circular vehicles.
The waveplates have to be isolated away from the center shaft, because this charge is not allowed to be grounded. Noticed, by more than one observer who has been able to create this effect is the strong static lightning bolts seen shooting out of the repulsion housing. These build up of charges can be captured and manipulated to capacitors and Static/AC/DC transformers for production into usable electrical current. This current can be used in operation of the vehicle or used to process electrical energy for residential use. Imagine running your repulsion system on the water supplied to your house. Static electricity is also the basis for electronic force fields.
V.S. wrote that on average, implosive forces are 127 times more powerful than explosive forces. Tesla’s 12” multi bladed turbine produced a possible 125 hp while Schaubergers 12” waveplates produced 1250 hp. (10 times more) Small implosion machines of 8” diameter rotating at 10,000 rpm. Can lift 57 tons and at 20,000 rpm. 228 tons.
So a 18” diameter should connect with repulsion energy at about 1500 rpm with an outside diameter velocity of 14,130 ft/min. or a speed of 282.6 mph. A total rpm range can easily exceed 10,000 rpm. So this could generate an enormous lift range totally incomparable to anything in existence even today. Air driven implosion machines specify air speeds of 124 mph. (124mph x 5280ft = 654720/60 min. = 10912/60 sec = 181.86 fps.
Wind velocity, must exceed this amount before repulsion happens. (pg. 134 fig.21) The greater the rpm, the more lift capability. So the 18” waveplate rotating at 10,000 rpm has an outside velocity of 1570 fps. Exactly how much lift capacity (suction), unknown. The actual volume of cubic feet of air moving thru the repulsion unit is staggering.
Hydrogen, being a by-product of the repulsion unit does not destroy the atmosphere like carbon monoxide. It actually enhances the environment.” The aeriform substances transformed in the machine create very high grade nitrogenous material which increases the vitality and germinating capacity of the vegetation”. V.S. PG. 116 Energy Evolution
Wave frequencies are also emitted from the repulsion unit upon entering the repulsion state. These frequencies are denoted to be in the 8 megahertz range. Much has been found regarding this information and will write more on this at a latter time.
There are numerous ways of restructuring the waveplate system to cause many forms of energy to come about. I will explain several of these that were written in “The Energy Evolution” book.
1885 Viktor Schauberger born in Holzschlag, Upper Austria, into a family with a long tradition of caring for the unspoilt Alpine forests.
1914-18 Soon after the birth of his son Walter, Viktor was enlisted in the Kaiser's army.
1919 Appointed forest warden and gamekeeper.
This is not new technology. It has been around for centuries. The Greeks first used it around 2000BC.
This is not a water softener. Nor is it Magic. This is: State-of-the-art Water Treatment for Rural or City applications.
Used for Many Applications - Residential, Agricultural, Commercial, and Industrial.
* A better tasting water.
* No more ugly stains on shower walls and toilets.
* White clothes can be white again.
* Less soap and detergent required in the laundry and dishwasher.
* Hard water spots and deposits easier to clean - less chemicals required to remove.
* Will not harm septic systems
Research and development of vortex water systems for rural private wells has been conducted in the field since 1998. Lab experiments and research are conducted in Malmo, Sweden by a team of researchers. Hundreds of systems are in operation in the United States, ranging in application from private wells to apartment buildings and mobile home parks. The systems are designed to require little to no scheduled maintenance. The nature of the problem water defines system design, which can be modified to achieve desired results. Field experience and lab experiments have provided positive results in the eradication of E.coli, algae, fungus, molds, anaerobic bacteria, coliform, cryptosporidium, and legionella. The vortex process places bacteria and viruses under high pressure (hydrocyclones) followed by a vacuum, which causes them to disintegrate.
--- Curt Hallberg <curt.hallberg@...
The last two years I have been working with water purifyers utilising V. S. theories. Mostly it is Dan Reeses Vortex System I have tested and been trying to develop further. This has also lead to other vortex treaters for water.
this file originates from rexresearch.com
Richard Clem: Engine
KeelyNet Post (December 26, 1992): The Richard Clem Engine
KeelyNet Post: The Clem Over-Unity Motor
KeelyNet Post (May 1996)
KeelyNet Post: New Info on the Richard Clem Engine
KeelyNet Email (David Hall)
Tyler Courier-Times (Sunday July 9, 1972)
Clem Engine Photo
Robert Koontz: The Clem Motor and the Conical Pump -- An Investigation of the Clem Motor (KeelyNet ~ 03/21/02)
Walter Haentjens: US Patent # 3,697,190 ~ Truncated Conical Drag Pump
KeelyNet (12-26-1992 / 7-5-1996) ~
The Richard Clem Engine